Operation With Active Source From Comand - Mercedes-Benz COMAND Operator's Manual

Rear Seat Entertainment System
Aux Operation
Display Aux
Select the display screen to which the
external source is connected.
Aux
Select .
Source £ Display Aux
Select
The video source is played if it is con-
nected to the screen and in playback
mode. If there is no video picture avail-
able, an Audio menu appears.
Selecting an Active COMAND Source
Aux
Select .
Source £ COMAND Audio
Select
COMAND Video
.
COMAND Audio: The Audio mode to
which COMAND is set is played by the
RSE system, too.
COMAND Video: COMAND sends the
video picture to the RSE system.
210
Operation with Active Source from
COMAND
Audio or Video that is active in COMAND
can also be played back via the RSE sys-
tem.
.
Switch to the desired Audio mode or
display the menu system in Video
mode on COMAND.
Select the menu item on the left below,
CD
e.g. if COMAND is in CD mode.
Active Source for the Rear
Select
or
In the status line you will see the headset
symbol and the symbol _ indicating the
active mode.
If you change the mode in COMAND, the
new mode is also played back via the RSE
system. The display changes accordingly.
Switching of the function on COMAND:
Switch to the desired Audio mode or
display the menu system in Video
mode on COMAND.
Select the menu item on the left below,
CD
e.g. if COMAND is in CD mode.
.
Rear Off
Select .