Mercedes-Benz COMAND Operator's Manual page 26

Which message appears in the multifunc-
tion display depends on your mobile
phone's authorization and on/off status:
If the mobile phone has not yet been
authorized, the message in the multi-
function display is: Bluetooth Ready.
If the mobile phone is switched on and
authorized, the message in the multi-
function display is: READY.
Answering a Call
When your mobile phone is ready to re-
ceive calls, you can answer a call at any
time. In the multifunction display you will
see a corresponding message or, if avail-
able, the caller ID (name and number):
Press button s.
You have answered the call.
Ending a Call or Rejecting an Incoming
Call
Press button t.
Dialing a Number from the Phone Book
If your mobile phone is ready to receive
calls, you may select and dial a number
from the phone book at any time.
Press button ÿ or è repeatedly
until the TEL menu appears in the mul-
tifunction display.
Press button j or k repeatedly
until the desired name or number ap-
pears in the multifunction display.
To scroll through the list of names
or numbers using the quick search
mode:
Press and hold button j or k for
longer than one second.
The system scrolls rapidly through the
list of names or numbers until you re-
lease the button.
The stored names are displayed in as-
cending or descending alphabetical or-
der.
To cancel the quick search mode:
Press button t.
At a glance
Multifunction Steering Wheel
i
If no contacts have been downloaded from
the mobile phone, 'No entries' appears in the
multifunction display when j or k is
pressed.
Press button s.
The system dials the selected phone
number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party you are
calling (if stored in your phone book)
will appear in the multifunction display.
If no connection is made, the control
system stores the dialed number in the
Calls dialed memory.
25