Creating A New Address Book Entry - Mercedes-Benz COMAND Operator's Manual

Creating a New Address Book Entry

i
You can create address data directly in the
address book. If you save phone numbers in the
COMAND phone book, these are saved in the ad-
dress book. When you save a navigation destina-
tion, COMAND creates an address book entry
containing the complete address data that sup-
port navigation.
Open the address book ( page 124)
New
and select .
The input menu with the data fields and
the speller appears.
Input menu with data fields
1 Selected data field with cursor
2 Speller
Switching Data Field
Press $ repeatedly until the predic-
tive speller is hidden.
Then press $ or % and press C
to select a data field.
or
Select [ or ] in the speller.
The input menu indicates the selected
data field.
Entering Data into a Field
Select all the characters one after the
other in the predictive speller 2.
i
The predictive speller provides the charac-
ters corresponding to the selected data field.
To switch predictive speller to up-
per or lower case characters: Select
( or &.
To switch predictive speller charac-
ter set: Select #.
Every time this is selected it switches
the character set.
To change the predictive speller lan-
guage: Select !.
Telephone
Address Book
Press $ or % until the required
language is highlighted and press C.
To move the cursor in the data field:
Select Y or Z.
Deleting
To delete an individual character:
Select õ and briefly press C.
or
Press î button.
The character to the left of the cursor is
deleted.
To delete an entire entry: Select
õ and press and hold C until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
125