Radio And Satellite Radio; Operation; Commands - Mercedes-Benz COMAND Operator's Manual

Voice Control

Radio and Satellite Radio

Radio and Satellite Radio

G
Warning
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.

Operation

You can use voice control to:
select the waveband
find a station
select a frequency (FM, AM)
select a category (Satellite radio)
listen to the station list
save a voice tag for a station
delete a station list (voice tags only)
delete a station (voice tag only)
select a channel number (Satellite ra-
dio)
234
The names of all received and stored sta-
tions are available for voice recognition. To
improve voice recognition, you can store a
voice tag for a specific speaker.
To select the radio or satellite radio appli-
cation:
Vehicles with Voice Control buttons
on the Multi-function Steering
Wheel: Press the ! button on the
multi-function steering wheel.
or
Vehicles with Lever for Voice Con-
trol: Pull the Voice Control lever to-
ward you ¸
Say the command "Radio" or "Satellite
Radio".
Vehicles with Voice Control buttons
on the Multi-function Steering
Wheel: Press the ! button.
or
Vehicles with Lever for Voice Con-
trol: Pull the Voice Control lever to-
ward you ¸
Say one of the radio or satellite radio
commands explained below.

Commands

You can always give the commands for the
radio when you are listening to the radio,
even if a different application is shown on
the display.
"Help Radio"
Using the "Help Radio" command, you can
have all the commands for the radio read
out.
"Help Satellite Radio"
Using the "Help Satellite Radio" command,
you can have all the commands for the sat-
ellite radio read out.
Selecting a Waveband
You can set the waveband with the follow-
ing commands:
"FM"
"AM"
"Next Station"/"Previous Station"
You can start manual tuning and set the
next station using the following com-
mands:
"Next station"