Switching Wavebands; Tuning To A Station - Mercedes-Benz COMAND Operator's Manual

Switching Wavebands

You can switch the radio between the FM,
AM, and WB wavebands.
FM AM WB
Select , or in the radio display.
The last selected station in the select-
ed waveband is heard.
i
In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
Press the b function button on the
control unit repeatedly until the desired
band is selected.
i
Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio mode ( page 143). Pressing again will
switch back to FM radio mode.

Tuning to a Station

You can tune to a station via station search
or by manual frequency input.
Tuning to a Station via Station Search
Press ( or & when the main
area is highlighted.
or
Press G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a Station via Manual
Frequency Input
Radio £ Enter Frequency
Select
radio display.
An input menu appears.
or
Press ó on the control unit.
To enter a frequency: Press number
buttons on the control unit.
i
You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i
If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a Station via the Station
Memory
Presets
Select in the radio display.
or
Press C when the main area is high-
lighted.
The station memory appears. The
in the dotR in front of a preset indicates that
the currently tuned station is stored
there.
To select a station:
Press % or $.
To tune to a station: Press C.
or
Press a number key, e.g. 4, on the
control unit.
Wavebands
AM
FM
WB (Weather Band)
Audio
Radio
Frequency
530 - 1710 kHz
87.7 - 107.9 MHz
Weather channels
135