Mercedes-Benz COMAND Operator's Manual page 95

Navigation
Route Guidance
Displaying Real-Time Traffic Reports
If necessary, switch to navigation mode
and show the menu system
( page 53).
Traffic
Select .
COMAND searches for SatRadio channels
sending traffic messages.
You will see a dialogue box displaying the
No Traffic Messages
message .
This either means:
messages were not yet received
there are no messages available
To cancel the search: Select
To close the message:
OK
Select
If there are traffic reports, you will see a
list.
The content of the list varies depending on
whether route guidance is active or not.
94
List When Route Guidance is not Active
The list shows all the roads, areas or re-
gions for which messages are available.
1 Icon for warning message
Cancel
.
2 Country designation
3 Road concerned
i
A traffic message may also concern an area
or region rather than a road, e.g. impaired visibil-
ity due to fog.
To read a traffic report:
Select a road, an area or region.
List when route guidance is active
The list first shows roads, areas or regions
on the route for which there are traffic re-
ports.
1 To display all traffic messages (includ-
ing those not concerning the route)
2 To have traffic reports read aloud, see
the reading aloud function ( page 95)
3 Affected roads, areas or regions (only
available when there are traffic mes-
sages for the route)
To display all messages:
Display All Messages
Select
You will see a list of all roads, areas or
regions for which reports are available,
including those that do not affect the
route.
.