Mercedes-Benz COMAND Operator's Manual page 217

Voice Control
Overview
Starting the Dialog
Switch on the ignition (see the vehicle
Owner's Manual).
Vehicles with Voice Control buttons
on the Multi-function Steering
Wheel: Press the ! button.
or
Vehicles with Lever for Voice Con-
trol: Pull the Voice Control lever to-
ward you ¸.
An acoustic signal confirms that the di-
alog has been started.
Give a command.
Interrupting the Dialog
If a list appears on the display, you can use
the "Pause" command to interrupt the dia-
log. You can then select an entry using the
COMAND controller.
To resume the dialog with voice control,
press the ! button on the multifunction
steering wheel.
216
Canceling the Dialog
Vehicles with Voice Control buttons
on the Multi-function Steering
Wheel: Press the L button on the
multifunction steering wheel.
or
Vehicles with Lever for Voice Con-
trol: Push the Voice Control lever away
from you º.
or
Say the command "Cancel" (except when
creating and storing voice tags, navigation
entries or during individualization).
or
Press any button on COMAND.
Adjusting the Volume
Start the dialog.
Give a command, e.g. "Help".
Press the æ or ç button.
The volume increases or decreases
during voice output.
or
Set the volume for the voice output on
the volume control for COMAND.
Display Messages
The audible help function can be supple-
mented by visual help on the display
( page 39). If the help function is
switched on, the most important com-
mands that are currently possible appear
in the display when you start the dialog.
In the address book and navigation sys-
tem, a selection list is shown in the display
if voice control requires additional informa-
tion from you.
Example display: SL-Class
1 Display