Audio Aux; Switching To Audio Aux - Mercedes-Benz COMAND Operator's Manual

Audio Aux

An external audio source (AUX) can be
connected to COMAND via the 1/8" jack
1 located inside the glovebox.

Switching to Audio Aux

From Another Main Function
£ £
Audio Audio
Select
dio menu ( page 132).
i
If Audio Aux mode was active last, you only
need to select Audio.
Within the Audio Function
Audio
Select
The Audio Aux menu appears.
The medium in the external audio
source is heard, provided it is connect-
ed and switched to playback.
i
Please refer to the relevant operating guide
for operation of the external audio source.
Aux
in the Au-
£ Aux
.
The following settings can be made in Au-
dio Aux mode:
Volume ( page 31)
Balance and fader ( page 32)
Treble and bass ( page 32)
Surround sound ( page 34)
G
Warning
Due to the different volumes of the external
audio sources, system messages (e.g. navi-
gation announcements) may be much loud-
er. You may need to disable these system
messages or adjust the volume of these
messages manually ( page 31).
i
The volume of external audio sources is ex-
tremely variable. It is possible that a device con-
nected as an external audio source will sound
quieter or louder in the vehicle or that the usual
maximum volume cannot be achieved. On cer-
tain devices the volume can be set separately. In
this case, start at a moderate volume and in-
crease it slowly. In this way, you can determine
whether the system is capable of playback with-
out distortion, even at high volume.
Audio

Audio Aux

173