Mercedes-Benz COMAND Operator's Manual page 29

At a glance
Operating COMAND
After you have pressed it the first time,
the character display appears at the
lower edge of the display. The first
available letter is highlighted.
You see which characters you can enter
with that key. Each time you press the key,
the next character is highlighted.
For example, key 2:
Press once = A
Press twice = B
Press three times = C
Wait until the character display disap-
pears.
28
Deleting an Entry
To delete individual characters: Se-
lect õ at the bottom right of the
speller and press C.
or
Press the î button.
To delete an entire entry: Select
õ and press and hold C until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
Cancelling an Entry
Select á at the bottom left of the
speller and press C.
or
Press the í button.
COMAND goes one step back in the se-
lection procedure.
If you press and hold the í button,
COMAND shows the basic display of
the current operating mode (e.g. radio
display).
Accepting First List Entry
Press and hold C until the
Enter Destination menu appears.
Here you will find the accepted list
entry.
or
If COMAND can match the characters en-
tered definitively to one town, the Enter
Destination menu appears automatically
with the selected list entry.
Switching to the List Without Predictive
Speller
If other entries for a town exist, or the
name exists more than once in the system,
then B is highlighted in the speller.
Press C.
You can switch to the list at any point while
entering characters.
Press $ repeatedly until the list ap-
pears without the speller.
or
Select B and press C.