Switching Between Mobile Phones - Mercedes-Benz COMAND Operating Instructions Manual

Connecting/disconnecting a mobile phone
144
Connect via
To select
X
press the controller.
A message is displayed, stating that you
can start the search on your mobile phone.
Mobile phone: start the search for a Blue-
X
tooth ® device (see manufacturer's operat-
ing instructions).
COMAND is displayed with the name "MB
Bluetooth" in the mobile phone's device
list.
Select "MB Bluetooth".
X
The following prompt appears in the
COMAND display
Device_name to be authorized?
COMAND: select Yes.
X
No
If is selected, the procedure is canceled.
If your mobile phone supports Secure Sim-
ple Pairing, a code is now displayed on both
devices.
The code is the same
COMAND: select Yes.
X
Mobile phone: confirm the code. Depend-
X
ing on the mobile phone used, you may
have to confirm the connection to
COMAND and for the PBAP and MAP Blue-
tooth ® profiles. The prompt to confirm may
take up to two minutes to be displayed. You
may also save the confirmation on the
mobile phone (see the manufacturer's
operating instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
To ensure an optimum language quality,
you can set the mobile phone's transmis-
sion and reception volume (
The code is different
COMAND: select No.
X
The process is canceled. Repeat the pro-
cedure.
If your mobile phone does not support Secure
Simple Pairing, an input menu is displayed for
the passkey. The passkey is a one- to sixteen-
digit number combination which you can
Phone: turn and
Do you want
page 145).
Y
choose yourself. Enter the same passkey on
both COMAND and the mobile phone and
confirm. Depending on the mobile phone
used, you may have to confirm the connection
to COMAND and for the PBAP and MAP Blue-
tooth ® profiles.
Reconnecting automatically
COMAND always searches for the last con-
nected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the system
searches for the mobile phone that was con-
nected before that one.

Switching between mobile phones

If you have authorized more than one mobile
phone, you can switch between the individual
phones.
To call up the telephone menu: press the
X
% button.
To switch to the menu bar: slide 6 the
X
controller.
Connect Device: turn and press
To select
X
the controller.
The device list is displayed.
To select the desired mobile phone: turn
X
and press the controller.
The selected mobile phone is searched for
and connected if it is within Bluetooth
range and if Bluetooth
Only one mobile phone can be connected at
any one time. The currently connected mobile
phone is indicated by the # dot in the device
list.
You can only switch to another authorized
i
mobile phone if you are not currently mak-
ing a call.
®
® is activated.