Winding Bobbin Thread; When Performing Winding Bobbin Thread While Performing Sewing; When Performing Winding Bobbin Thread Only - JUKI AMS-210EN/IP-420 Instruction Manual

2-11. Winding bobbin thread

(1) When performing winding bobbin thread while performing sewing

(2) When performing winding bobbin thread only

Bobbin winder does not work immediately after turning ON the power. Perform the bob-
bin winding after setting pattern No. or the like once, pressing the READY key
making the sewing LED light up.
1 Display the bobbin winding screen.
Press BOBBIN WINDER button
A
screen (blue) and the presser comes down. Then the bobbin
winding screen is displayed.
2 Start bobbin winding.
B
Depress the start pedal, and the sewing machine rotates and
starts winding bobbin thread.
3 Stop the sewing machine.
Press STOP button
returns to the normal mode. Or, depress the start pedal again
during winding bobbin and the sewing machine stops while the
bobbin thread winding mode stays as it is. Depress the start
pedal again and the bobbin winding starts again. Use this way
when winding bobbin thread around plural bobbins.
– 48 –
Thread the bobbin winder and wind the
bobbin thread onto the bobbin as illustrat-
ed in the figure.
A in the data input
B and the sewing machine stops and
, and