Print Position Command; [Esc+H] Horizontal Print Position - SATO CL4NX Programming Reference Manual

Print Position Command

Horizontal Print Position [ESC+H]
[ESC+V] Vertical Print Position
Parent topic Part 1 SBPL Commands

[ESC+H] Horizontal Print Position

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying horizontal print position from its start point by dot.
[Format]
<H>aaaa
• Parameter
a [Horizontal Print Position] = Refer to the table below.
[Coding Example]
Horizontal print position: 200 dots
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
• Specifying the start of horizontal position for the print of text, barcode, ruled line and graphic.
[Note]
• Any contents such as text, barcode, graphic exceed printing area will not be printed.
[Initial Value and Valid Range of Parameter]
Model
CL4NX
CL6NX
ESC
<1B>
16
aaaa=1
When the power is OFF
Valid range within items
Valid range between items
Head density
203 dpi
305 dpi
609 dpi
203 dpi
32
H
<48>
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
Initial value
1
1
1
1
Parameter
aaaa
Valid range (dots)
1 to 832
1 to 1248
1 to 2496
*1
1 to 1216