SERVICE TOOLS
3.3 OUTPUT CHECK MODE
The output check mode allows you to turn the current individual electrical
components ON/OFF from the operation panel.
3.3.1 Access Procedure
[D]
[H]
[C]
[G]
1. Turn on the main switch.
2. Turn on DPS101-7 and 101-8 on the main board.
NOTE: The Call Service [A] and Used Toner Tank [B] indicators will blink.
This is to confirm that the correct mode has been selected.
ON
1
2
3
4
5
6
[B]
[A]
4-36
31 December 1992
7
8
[I]
[J]
[E]
[F]