Ftp Server Application Example - Omron NX-series User Manual

4 SD Memory Card Operations
3
Connect the Communication Control Unit online and transfer the settings to the Controller.
4
Insert the SD Memory Card into the Communication Control Unit.
5
Connect to the built-in EtherNet/IP port from an FTP client.
6
Input the FTP login name and password that you set in the Built-in EtherNet/IP Port Settings to
log in to the built-in EtherNet/IP port.
7
After you are logged in, you can use ftp commands, such as cd (Change Directory) and get
(Obtain File) for the MEMCARD1 directory in the SD Memory Card in the Controller.
8
Close the connection.
List of Settings Required for the FTP Server Function
Make the following settings for the unit setup when the FTP server function is used.
Built-in EtherNet/IP Port
Settings Tab Page on
Sysmac Studio
FTP
*1. If the Do not use Option is selected for the FTP server, these settings are not required.
Additional Information
Make settings in the FTP Settings Display if the FTP server is used. Refer to A-1-3 FTP
Settings Display on page A - 7 for information on the FTP Settings Display.
4-3-4

FTP Server Application Example

An example of using the FTP server with the login name "user1" and the password "password" is
shown below.
Additional Information
When a general-purpose FTP application is used, you can use a graphical user interface similar
to Explorer to transfer and read files.
l Step
(1) Make sure that an SD Memory Card is inserted and turn ON the power supply to the Control-
ler.
(2) Connect to the FTP server from a computer on the Ethernet by entering the text that is under-
lined in the following diagram.
4 - 8
Setting
FTP server
Port No.
Login name
Password
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Setting conditions
Required
*1
Optional
Required when changing the de-
fault value of 21.
*1
Required
*1
Required
Reference
page A - 7