Omron NX-series User Manual page 109

Unit version: Unit version 1.00
CIP major revision: 02 hex
CIP minor revision: 06 hex
(c) Status Details of the Built-in EtherNet/IP Port
Bit Name
0 Owned
1 Reserved
2 Configured
3 Reserved
4 to 7 Extended Device Status
8 Minor Recoverable Fault
9 Minor Unrecoverable Fault
10 Major Recoverable Fault
11 Major Unrecoverable Fault
12 to 15 Reserved
*1. Status of the built-in EtherNet/IP port for b4 to b7
b7 b6
0 1
0 0
0 0
0 1
0 1
Request Paths (IOIs) to Specify Objects
When you specify an object, specify the request path (IOI) for each service code as given below.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Indicates when the built-in EtherNet/IP port has an open connection as the
target of a tag data link.
Always FALSE
Tag data link settings exist.
Always FALSE
Indicates the status of the built-in EtherNet/IP port.
TRUE when any of the following errors occurs.
•
IP Rout Table Setting Error
•
DNS Server Connection Failed
•
Tag Data Link Setting Error
•
Tag Data Link Timeout
•
Tag Data Link Connection Timeout
•
FTP Server Setting Error
•
NTP Client Setting Error
•
SNMP Setting Error
•
NTP Server Connection Failed
•
Tag Name Resolution Error
TRUE when the following error occurs.
•
Identity Error
TRUE when any of the following errors occurs.
•
IP Address Duplication Error
•
BOOTP Server Connection Error
•
Basic Ethernet Setting Error
•
IP Address Setting Error
TRUE when any of the following errors occurs.
•
Communications Controller Failure
•
MAC Address Error
Always FALSE
b5 b4
0 1 A major fault occurred.
1 0 A timeout occurred in one or more target connections.
1 1 Indicates that there are no tag data link settings.
1 0 Indicates that one or more connections are performing communications
normally.
1 1 Other than the above.
8 CIP Message Communications
Description
*1
8
8 - 13