Omron NX-series User Manual page 160

Safety network controller communication control unit built-in function
Hide thumbs Also See for NX-series:
Table of Contents

Advertisement

10 SNMP Agent
Subtree name
ifSpecific
l Ip Group: Ip
Subtree name
ipForwarding
IpDefaultTTL
IpInReceives
IpInHdrErrors
IpInAddrErrors
ipForwDatagrams
ipInUnknownProtos
10 - 8
Standard [(identifier) attribute]
[(22) RO]
The object ID that represents a reference to
the media-specific MIB for the interface.
For example, for Ethernet, set the object ID
of the MIB that defines Ethernet. If there is no
information, set { 0.0 }.
Standard [(identifier) attribute]
[(1) RW]
Indicates if the device operates as a gateway.
IP gateways can transfer datagrams, but IP
hosts can perform only source routing. Some
nodes take only one of these values. There-
fore, if you try to change this object using the
SNMP Manager, a badValue error is re-
turned.
Forwarding (1)
Not-forwarding (2)
[(2) RW]
The default value set for the IP header TTL if
no TTL value was given by the transport lay-
er protocol.
[(3) RO]
The number of all IP datagrams that reached
the interface, including errors.
[(4) RO]
The number of received datagrams that were
discarded because of IP header errors, such
as a checksum error, a version number error,
a format error, a TTL error, an IP option error,
etc.
[(5) RO]
The number of packets that were discarded
because the destination IP address in the IP
header was not valid.
[(6) RO]
The number of IP datagrams that were trans-
ferred to their final destination. If this node
does not operate as an IP gateway, it is the
number of datagrams that were successfully
transferred by the source routing.
[(7) RO]
The number of IP datagrams that were re-
ceived but discarded because they were of
an unsupported or unrecognized protocol.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Specifications of im-
Support
plementation
Support-
0.0
ed
Specifications of im-
Support
plementation
Support-
forwarding (1)
ed
not-forwarding (2)
Support-
64
ed
Support-
According to the stand-
ed
ard.
Support-
According to the stand-
ed
ard.
Support-
According to the stand-
ed
ard.
Support-
According to the stand-
ed
ard.
Support-
According to the stand-
ard.
ed

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-csg series

Table of Contents