Omron NX-series User Manual page 66

4 SD Memory Card Operations
type
l Format
type data_type
l Function
• Specifies the file data type.
• The following data types are supported:
ascii: Files are transferred as ASCII data.
binary (image): Files are transferred as binary data.
The Communication Control Unit handles binary files. Use the type command to specify binary
transfers before you upload or download files.
• The default file type is ASCII.
get
l Format
get file_name [receive_file_name]
l Function
• Transfers the specified remote file from the SD Memory Card to the local host.
• You can specify the name of the file to be received on the local host by setting receive file name.
mget
l Format
mget file_name
l Function
• With wildcards (*) included in the file_name, transfers multiple remote files from the SD Memory
Card to the local host.
put
l Format
put file_name [destination_file_name]
l Function
• Transfers the specified local file to the remote host (to the SD Memory Card).
• You can save the transfered file with the name you specify for the destination_file_name.
• Any existing file with the same name in the remote host (on the SD Memory Card) is overwritten
by the contents of the transferred file.
4 - 14
NX-series Communication Control Unit Built-in Function User's Manual (Z396)