Omron NX-series User Manual page 189

The destination is specified by its IP address or host name.
Additional Information
The PING command is not supported by some host computers.
Application Example
In this example, a PING command is sent to the node at IP address 130.25.36.8.
The "$" in the example represents the host computer prompt.
l Normal Execution
$ ping 130.25.36.8
PING 130.25.36.8: 56 data bytes
64 bytes from 130.25.36.8: icmp_seq=0. time=0. ms
64 bytes from 130.25.36.8: icmp_seq=1. time=0. ms
64 bytes from 130.25.36.8: icmp_seq=8. time=0. ms
---- 130.25.36.8 PING Statistics ----
9 packets transmitted, 9 packets received, 0% packet loss
round-trip
$
l Error
$ ping 130.25.36.8
PING 130.25.36.8: 56 data bytes
---- 130.25.36.8 PING Statistics ----
9 packets transmitted, 0 packets received, 100% packet loss
$
Refer to the command reference manual for your computer's OS for details on using the PING
command.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
: : :
(ms) min/avg/max = 0/0/0
← Executes the PING command.
: :
← Press the Ctrl+C Keys to cancel execution.
← Executes the PING command.
← Press the Ctrl+C Keys to cancel execution.
Appendices
A
A - 15