RS-232C Serial Communications
7-2-3
Application Example
System Configuration
G9SP-series Controller Settings
This section uses the following example to describe how to access a G9SP-
series Controller by performing serial communications through a RS-232C
Serial Communications Board (CP1W-CIF01) from a Standard PLC.
OMRON Standard PLC (See note.)
CP1E-series PLC
RS-232
port
Note This example uses the following OMRON Standard PLC.
Product
CPU Unit (Standard PLC)
Support Software (for setup and
creating ladder programs)
Settings are not required. Make the communications settings in the OMRON
Standard PLC to match the serial communications specifications of the
G9SP-series Controller.
No-protocol
G9SP-series Controller
CP1W-CIF01
Option Board
Model/version
CP1E-N40DR-A
CX-Programmer Ver. 9.10
Section 7-2
117