Omron NX-series User Manual page 168

10 SNMP Agent
Name
tcpConnEntry
tcpConnState
tcpConnLoca-
lAddress
tcpConnLocal-
Port
tcpConnRe-
mAddress
tcpConnRem-
Port
tcpInErrs
tcpOutRsts
l Ip Group: Udp
Name
udpInDatagrams
10 - 16
Standard [(identifier) attribute]
[(1) NA]
Entry information related to a specific TCP
connection. This value is deleted when the
connection changes to the CLOSE state. The
indices are tcpConnLocalAddress,
tcpConnLocalPort, tcpConnRemAddress,
and tcpConnRemPort.
[(1) RW]
The status of the TCP connection.
closed (1)
listen (2)
synSent (3)
synReceived (4)
established (5)
finWait1 (6)
finWait2 (7)
closeWait (8)
lastAck (9)
closing (10)
timeWait (11)
[(2) RO]
The local IP address of this TCP connection.
A value of 0.0.0.0 is used for connections in
the LISTEN state that accept connections
from any IP interface related to the node.
[(3) RO]
The local port number for this TCP connec-
tion.
[(4) RO]
The remote IP address for this TCP connec-
tion.
[(5) RO]
The remote port number for this TCP connec-
tion.
[(14) RO]
The total number of error segments received
such as TCP checksum errors
[(15) RO]
The number of segments sent with the RST
flag (the number of times the TCP connection
was reset).
Standard [(identifier) attribute]
[(1) RO]
The total number of UDP datagrams (i.e., the
number of packets) sent to the UDP user.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Specifications of im-
Support
plementation
--- ---
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Implementation spec-
Support
ifications
Support- According to the stand-
ed ard.