Rotate, Moving Base Reference Point - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference

Rotate, Moving Base Reference Point

Command Structure
Normal Direction <ESC>N
Rotated Direction <ESC>R
Example:
Placement:
Default:
Command Function
The <ESC>R command rotates the printing of all subsequent images in a print job by
0
90 counterclockwise each time it is used. It also moves the base reference point to a
different corner of the print area.
The <ESC>N command returns to the original base reference point and returns
printing to the normal orientation.
Printer Input
<ESC>A
<ESC>N<ESC>H0100<ESC>V0010<ESC>MNORMAL DIRECTION
<ESC>R<ESC>H0400<ESC>V0100<ESC>MONE
<ESC>R<ESC>H0100<ESC>V0400<ESC>MTWO
<ESC>R<ESC>H0100<ESC>V0100<ESC>MTHREE
<ESC>R<ESC>H0100<ESC>V0100<ESC>MFOUR
<ESC>Q1<ESC>Z
Printer Output
Page 4-72
SATO M-5900RV Operator and Technical Reference Manual
See above
Preceding any printed data to be rotated
<ESC>N
PN 9001081
Rev. C