Off-Line/Pause - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
<ESC>@,nn...n
Example:
Placement:
Default:
Command Function
To specify the printer to come to an off-line state. When used within a print
job, the printer goes off-line after finishing the print job.
Printer Input
<ESC>A
<ESC>@,Load Blue Labels and place printer On-Line
...Job...
<ESC>Z
Printer Output
There is no printer output for this command. The printer is placed in the Off-
Line mode as soon as the current print job is finished.
Special Notes
1. You must press the LINE key on the front panel to return the printer to an
On-Line status (see Operator Panel in Section 2 of this manual).
2. Remember, when using this command that if the print job specifies
<ESC>Q10, all ten labels will print before the printer will go off-line.
Page 4-56

Off-Line/Pause

nn...n = Optional message to be displayed on the LCD. Maximum of
32 characters
See above
Anywhere in the print job location between <ESC>A and
<ESC>Z
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C