Bowflex LateralX LX3 Service Manual page 29

17. Using an 8mm hex wrench, loosen and remove the indicated screws
from the Crank arms.
18. Insert the M8 washer from step 16 in the gap in the Crank arm. Using
an 8mm hex wrench, screw the M10 x 50 screw into the threaded hole to
open the gap in the Crank arm.
M8
M10 x 50
washer
screw
19. Remove the old Crank arm from the Crank pulley.
20. Insert M8 washer in the gap of the new Crank arm. Using an 8mm hex
wrench, screw the M10 x 50 screw from one end of the threaded hole into
the Crank arm to open the gap in the Crank arm.
M10 x 50
screw
M8
washer
29