Bowflex LateralX LX3 Service Manual page 28

13. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Right Lower Shroud. Carefully remove the Right Lower Shroud and
set it safely aside.
If you are only replacing the Right Crank arm, go to step 16.
If you are replacing the Left Crank arm, continue to step 14.
14. Using a 17mm open end wrench, loosen and remove the indicated nut
from the Left Lower Shroud. Carefully pull the Power Inlet plug out of the
hole toward the inside of the Shroud.
15. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Left Lower Shroud. Carefully remove the Left Lower Shroud and set it
safely aside.
16. Using a 13mm wrench, loosen and remove the indicated hex head
screws and washers from the Crank and set them safely aside.
28