Bowflex LateralX LX3 Service Manual page 25

4. Using a #2 Phillips screwdriver, remove the 6 indicated screws
(arrows) from the Upper Shrouds. Use a flathead screwdriver to separate
the Shrouds at the push fasteners. Remove the Shrouds and Mast
Gasket, and set them safely aside.
X6
5. Using a 6mm hex wrench, remove the indicated screw. Rotate the
Lateral Link out of the way.
X2
6. Using a 6mm hex wrench, remove the indicated hardware. Remove
the Parallel Links.
X4
25