Table of Contents
Advertisement
26. Use a 17mm open-end wrench to tighten the illustrated nut (do not
skip this step if the tension is correct).
27. Turn the crank 3~5 turns in the direction of the arrow to make the belt
rotate smoothly.
Be sure to keep fingers clear of all pinch hazards when you
!
turn the Crank.
Reassembly
28. Using a Phillips screwdriver, attach the Left Lower Shroud, to the main
frame. First, lock the screw in position A, then lock the screw in position B,
and then tighten the screws in the other positions.
29. Insert the Power Inlet cable connector into the Left Lower Shroud.
Using a 17mm wrench, tighten the nut to secure the power cable
connector.
A
20
B
Hide quick links:
Advertisement
Table of Contents
