Bowflex LateralX LX3 Service Manual page 49

Disconnect all power to the machine before you service it.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving
these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
Note: Your machine may not match the image. For reference only.
1. Remove the Pivot Bolt Cover from the left Handlebar Arm. Using a 6mm
hex wrench, remove the indicated hardware. Set it safely aside.
2. Using a 10mm hex wrench, remove the indicated Screw (by arrow) from
the Handlebar Arm and Handlebar Link.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure to stay out
of the path of the Handlebar Arm.
3. Remove the Handlebar Arm and Wave Washer. Set them safely aside.
49