Table of Contents
Advertisement
10. Connect the Static Handlebar cables to the new Mast Cables at the
handlebar mount opening. Reinstall the Static Handlebar on the Console
Mast.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
11. Connect the Console Cables to the new Mast Cables. Reinstall the
Mast Endcap.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
12. Connect the Mast Cable to the Engine Assembly cable.
NOTICE: Align the clips on the cable connectors and make sure the
connectors lock. Do not crimp the cables.
13. Put the Left Upper Shroud in position. Align the Push Fasteners. Push
the Shrouds together so that the Push Fasteners are fully seated. Using a
#2 Phillips screwdriver, re-install the 3 screws. Re-install the Mast Gasket.
52
Hide quick links:
Advertisement
Table of Contents
