Table of Contents
Advertisement
14. Be sure the Handlebar Link is tilted forward. Put the Wave Washers on
the pivot rod.
Be aware that the Handlebar Arms are top heavy, and will
want to pivot when attached onto the Pivot Rod. Be sure to
stay out of the path of the Handlebar.
Align the Handlebar Arm assembly with the pivot rod and attach the lower
Handlebar Arm to the Handlebar Link using a 10mm hex wrench. Slide the
Handlebar Arm assembly fully onto the pivot rod and install the hardware
using a 6mm hex wrench. Re-install the Pivot Bolt Cover.
15. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
53
Hide quick links:
Advertisement
Table of Contents
