Bowflex LateralX LX3 Service Manual page 45

14. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Left Lower Shroud. Carefully remove the old Left Lower Shroud and
set it safely aside.
15. Using a Phillips screwdriver, attach the new Left Lower Shroud to
the main frame. First, lock the screw in position A, then lock the screw in
A
position B, and then tighten the screws in the other positions. )
B
16. Insert the Power Inlet cable connector into the Left Lower Shroud.
Using a 17mm wrench, tighten the nut to secure the power cable
connector.
17. Align the new Right Lower Shroud with the push fasteners on the Left
Lower Shroud and move the Right Lower Shroud into position. Push the
Shrouds together so that the Push Fasteners are fully seated.
45