Bowflex LateralX LX3 Service Manual page 42

4. Using a #2 Phillips screwdriver, remove the 6 indicated screws (arrows)
from the Upper Shrouds. Use a flathead screwdriver to separate the
Shrouds at the push fasteners. Remove the Shrouds and Mast Gasket,
and set them safely aside.
X6
5. Using a 6mm hex wrench, remove the indicated hardware. Rotate the
Lateral Link out of the way.
X2
6. Using a 6mm hex wrench, remove the indicated hardware. Remove the
Parallel Links.
X4
42