Table of Contents
Advertisement
18. Install the new Lower Shroud to the Frame Assembly with the screws.
Use a Phillips screwdriver to lock the screw in position A, then lock the
A
screw in position B, and then tighten the screws in the other positions.
B
19. Put the Left Mid Pedal Arm back on the Crank.
LX3/LX3i—move the Swing Arm end into the Mid Pedal Arm bracket.
Using two 8" or longer adjustable wrenches (or M24 socket wrench and
24mm box wrench), install the indicated screw and nut.
LX5/LX5i—move the Adjustable Arm to engage the Mid Pedal Arm
bracket. Using an M24 or 15/16" socket wrench (inside of arm) and
24mm open end wrench or adjustable wrench (outside of arm), install the
indicated screw and nut.
Fully tighten the nut.
20. Secure the Mid Pedal Arm to the Crank using the indicated screw and
washer. Use a 13mm socket to tighten securely.
Install the Endcap.
21. Repeat steps 15-16 for the Right Mid Pedal Arm.
46
Hide quick links:
Advertisement
Table of Contents
