Replace The Lower Shrouds - Bowflex LateralX LX3 Service Manual

Lateral trainers

Assembly and owner's manual (48 pages)

Table of Contents

™

NOTICE: This document provides instructions for the replacement of the Shrouds on the Bowflex

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside

US/Canada). To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all

Warnings on this machine.

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in

China | © 2017 Nautilus, Inc. | Bowflex, the B logo and LateralX are trademarks owned or licensed by Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other countries. |

ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all

Warnings on this machine.

Disconnect all power to the machine before you service it.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders, children and pets away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Disconnect all power and allow to sit for 5 minutes before you service this machine.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a

risk to users, keep the machine from operating correctly and will void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or

replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact

Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Tools Required (not included)

6mm hex wrench

8mm hex wrench

10mm hex wrench

#2 Phillips screwdriver

Flathead screwdriver

17mm open end wrench

Replace the Lower Shrouds on the

™

Bowflex

™

LateralX