Bowflex LateralX LX3 Service Manual page 27

10. Remove the Endcaps from the Mid Pedal Arms. Using a 13mm socket
or box end wrench, remove the indicated hardware.
Note: The hardware is very tight (factory installed).
11. Using two 8" or longer adjustable wrenches (or M24 socket wrench
and 24mm box wrench), remove the indicated screw and nut.
Note: The hardware is very tight
(factory installed).
Pivot the Swing Arms toward the front and remove the Mid Pedal Arms.
12. Using a #2 Phillips screwdriver, remove the indicated screws from the
Crank Shrouds. Remove the Crank Shrouds and set them safely aside.
27