20. Using a 17mm open-end wrench, fully tighten the illustrated nut.
21. Turn the crank 3~5 turns in the direction of the arrow to make the belt
rotate smoothly.
Be sure to keep fingers clear of all pinch hazards when you
!
turn the Crank.
Second stage belt tension check
22. To test the Left Drive Belt tension:
On the upper part of the belt, twist the belt at the midpoint between the
pulleys. The belt should not twist more than 90 degrees (vertical).
If the tension is correct, go to Step 28.
If the tension is too loose, adjust:
18