Ricoh SP 330SN User Manual page 401

Message
Unavailable Paper 2-sided copy could not be
Type performed because the tray
does not contain the valid type
paper, which is thin, plain,
recycled, color, preprinted,
thick 1, letterhead, special, or
prepunched.
Unsupported Device The Scan to USB function failed
Please Remove because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
USB Disconnected The Scan to USB function failed
because the USB flash disk was
Press Clear key
removed before the operation
could be completed.
Causes
• When Using the Touch Panel Model
• When Using the Four-line LCD Panel
• When Using the Touch Panel Model
• When Using the Four-line LCD Panel
Use a USB flash disk that is compatible
with the Scan to USB function.
Check that the USB flash disk is securely
inserted in the machine. Do not pull out the
USB flash disk until "Ready" appears on
the display.
Error and Status Messages on the Screen
Solutions
Specify the tray containing the valid
type paper (other than the bypass
tray) in the [Select Paper] setting. See
page 239 "Copier Features Settings
(When Using the Touch Panel
Model)".
Model
Specify the tray containing the valid
type paper (other than the bypass
tray) in the [Select Paper] setting. See
page 287 "Copier Features Settings
(When Using the Four-line LCD Panel
Model)".
Specify the valid paper type for the
tray selected for printing copies. See
page 266 "Paper Settings (When
Using the Touch Panel Model)".
Model
Specify the valid paper type for the
tray selected for printing copies. See
page 304 "Tray Paper Settings
(When Using the Four-line LCD Panel
Model)".
399