Ricoh SP 330SN User Manual page 127

When using the four-line LCD panel model
1. Press the [Duplex] key.
2. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK]
key.
3. Press the [ ] or [ ] key to select paper orientation and page order, and then press
the [OK] key.
• Setting combined and 2-sided copying automatically disables the ID card copy setting.
• You can change the machine's default [Duplex/Combine] setting to always make photocopies in
the specified ratio. For details, see page 239 "Copier Features Settings (When Using the Touch
Panel Model)" or page 287 "Copier Features Settings (When Using the Four-line LCD Panel
Model)".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] or [System
Auto Reset Timer] while the initial screen is displayed. For details, see page 271
"Administrator Tools Settings (When Using the Touch Panel Model)" or page 310
"Administrator Tools Settings (When Using the Four-line LCD Panel Model)".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Copying Single-Sided Originals with 2-Sided and Combined Printing
DYG321
125