Ricoh SP 330SN User Manual page 383

Laser all-in-one printer

Hide thumbs Also See for SP 330SN:

Table of Contents

Wipe the rubber part of the roller with a soft damp cloth. After that, wipe it with a dry

cloth to remove the moisture.

Reload the removed paper into the tray, and then push the tray carefully into the machine

until it clicks into place.

Insert the plug of the power cord into the wall socket securely. Connect all the interface

cables that were removed.

Turn on the power.

• If jams or multi-sheet feeds occur after cleaning the friction pad, contact your sales or service

representative.

• If Tray 2 is installed, clean its friction pad and paper feed roller in the same way as you did for

Cleaning the Friction Pad and Paper Feed Roller

Troubleshooting

Sp 330sfn Sp 3710sf