Ricoh SP 330SN User Manual page 161

6. Press the [Start] key.
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
If you see this screen, proceed to the next step.
7. If you have more originals to scan, place the next original on the exposure glass,
and then press [Yes]. Repeat this step until all originals are scanned.
8. When all originals have been scanned, press [No] to start sending the scanned file.
• To cancel scanning, press the [Clear/Stop] key. The scan files are discarded.
• With the four-line LCD panel model, you can also specify a destination using [Resend]. For details,
see page 169 "Specifying the Scan Destination Using [Resend] (When Using the Touch Panel
Model)".
DYG334
Basic Operation of Scan to Folder
159