Paper Specifications And Adding Paper; Workflow For Loading Paper And Configuring Paper Sizes And Types - Ricoh SP 330SN User Manual

2. Paper Specifications and Adding
Paper
This chapter describes how to load paper and originals and about their specifications.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and operations required after paper is loaded.
After following the procedures below, you can copy or print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
For details about the procedures, refer to the next page.
Procedure
For details about supported paper, see page 74 "Supported Paper".
See page 56 "Loading Paper".
• When using the control panel
See page 64 "Specifying Paper Type and Paper Size Using the
Control Panel".
• When using Web Image Monitor
See page 71 "Specifying Paper Type and Paper Size Using Web
Image Monitor".
• When using Smart Organizing Monitor
See page 69 "Specifying Paper Type and Paper Size Using Smart
Organizing Monitor".
See page 72 "Specifying Paper Type and Paper Size Using the Printer
Driver".
Reference
55