Ricoh SP 330SN User Manual page 298

7. Configuring the Machine Using the Control Panel
Auto Continue
Item
Auto Continue
Toner Saving
Item
Toner Saving
Supplies Status
Displays information about consumables.
Item
Print Cart.
Printer Registration
Adjust the registration of each tray if necessary. You can adjust the registration value between -15
and +15 (that is, -1.5 and +1.5 mm, in 0.1 mm increments).
296
Description
Sets the machine to ignore an error
with paper size or type and continue
printing. The printing stops temporarily
when an error is detected, and restarts
automatically after about ten seconds
using the settings made on the control
panel.
However, if the size of paper specified
on the control panel and that of the
paper loaded in the paper tray or the
paper size specified for the print job
do not match when printing restarts, it
may cause a paper jam.
Description
Sets the machine to print using a
reduced amount of toner (for prints
made by the copier function only).
Description
Displays the remaining amount of
supplies.
Value
• Off
• On
Default: [Off]
Value
• Off
• On
Default: [Off]
Value
• (New)
•
•
•
•
• (Needs replacing)