Ricoh SP 330SN User Manual page 25

No. Name
4 Number keys
5 [Clear/Stop] key
6 [Power] key
7 Fax indicator
8 Data In indicator
9 Alert indicator
10 [Start] key
• The backlight of the screen is turned off when the machine is in Energy Saver mode.
• When the machine is processing a job, you cannot display the menu for configuring the machine.
You can confirm the machine's status by checking messages on the screen. If you see messages
such as "Printing...", "Copying...", or "Processing...", wait until the current job is finished.
Use to enter the numbers for copies, fax numbers and data for the
selected function.
• While the machine is processing a job: press to cancel the
current job.
• While configuring the machine settings: press to cancel the
current setting and return to standby mode.
• While in standby mode: press to cancel temporary settings
such as image density or resolution.
Press to turn the main power on or off.
This indicator lights up when the machine is turned on.
To turn off the machine, press and hold down this key for at least
three seconds.
If you press this key for less than 3 seconds, the machine switches
to Energy Saver mode. To recover Energy Saver mode, press this
key again for less than 3 seconds.
Indicates the status of the fax functions. Lights up when received
faxes that have not been printed out exist in the machine's
memory.
This indicator flashes when the machine receives print data from a
host device.
This indicator lights up when there is a Locked Print file stored in
the machine.
Flashes when the toner is nearly empty, or lights up when the
machine runs out of toner or a machine error occurs.
When an alert is issued, check the messages on the screen. For
details about the messages that appear on the screen, see
page 387 "Error and Status Messages on the Screen".
Press to scan or copy or start sending a fax.
Guide to Components
Description
23