Ricoh SP 330SN User Manual page 409

8. Slide the print cartridge in horizontally. When the cartridge can go no further, raise it
slightly and push it fully in. Then push down on the cartridge until it clicks into place.
9. Using both hands, carefully push up the front cover until it closes.
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
Removing jammed paper from the bypass tray
• When Using the Touch Panel Model
If "Misfeed: Paper Tray" appears on the display, follow the procedure below to remove it.
• When Using the Four-line LCD Panel Model
If "Misfeed: BypassTray" appears on the display, follow the procedure below to remove it.
1. If paper is jammed in the bypass tray input area, remove the jammed paper carefully.
2. Close the bypass tray.
DYH065
DYG292
Removing Paper Jams
407