Ricoh SP 330SN User Manual page 397

Message
Internal Misfeed Paper has been jammed in the
machine.
Memory Overflow The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Memory Overflow The data is too large or
complex to print.
Memory Overflow
Causes
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Error and Status Messages on the Screen
Solutions
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Wait until pending jobs have been
transmitted or printed.
• When Using the Touch Panel Model
Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See
page 262 "Printer Features Settings
(When Using the Touch Panel
Model)".
• When Using the Four-line LCD Panel
Model
Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See
page 299 "Printer Features Settings
(When Using the Four-line LCD Panel
Model)".
• If using the PCL6 printer driver, set
[Resolution] in the [Print Quality] tab
to [600 × 600 dpi].
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
395