Table of Contents
Advertisement
W
Warning
Read the safety information at the beginning of
Chapter 2 before using the loss/length option.
Overview of Features
The loss/length measurement option provides the following
features, in addition to the OTDR module features
described in Chapter 1:
•
Measures optical power loss, length, and propagation
delay on dual-fiber cabling. Provides pass/fail results
based on limits you enter or on factory-installed limits.
•
™
FindFiber
function helps you identify and verify
optical connections.
The loss/length option is available with OFTM-5612B and
OFTM-5732 modules.
*
Using the Loss/Length Option
About Smart Remotes
You can use the following as the remote for loss/length
testing and FindFiber tests in Smart Remote mode:
•
A second OptiFiber tester with the loss/length option
•
A Fluke Networks DTX Series CableAnalyzer
remote with a multimode or singlemode fiber module.
The DTX remote can also be used as a manually-
controlled source for testing in Far End Source mode.
You can buy a DTX smart remote separately for this
purpose. See the Fluke Networks website or contact
Fluke Networks for details.
The OptiFiber tester must have software version
2.0 or later to work with a DTX-xFM2 smart
remote. OptiFiber software updates are available
on the Fluke Networks website.
Chapter 7
™
smart
Note
7-1
Advertisement
Table of Contents
