Changing The Length Units; Auto Shut Off - Fluke MicroScanner Series Getting Started Manual
Hide thumbs
Also See for MicroScanner Series:
- Getting started manual (156 pages) ,
- User manual (70 pages) ,
- Getting started manual (14 pages)
Table of Contents
Advertisement
Find Quality Products Online at:
Changing the Length Units
2
MicroScanner
: Indicates an ID locator is
connected to the far end of the cable.
Ethernet port indicator. The speeds of the
port show under the indicator.
Wiremap diagram. The rightmost segments
indicate the shield.
W
The
indicates a fault or high voltage on
the cable. SPLIT appears when the fault is a
split pair.
Changing the Length Units
Hold down
and
or
1
turning on the tester.
Press
or
to switch between meters
2
and feet.
Auto Shutoff
The tester turns off after 10 minutes if no keys
are pressed and nothing changes at the tester's
connectors.
Testing Cabling
Press
to turn on the tester.
1
2
MicroScanner
: Press
2
twisted pair (
) and coaxial (
Connect as shown in the following figures.
3
If the
indicator appears, see page 11.
PoE
8
GlobalTestSupply
www.
and
while
to switch between
) modes.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
