Limit Table Editor Screen - Fluke OF-500-01 OptiFiber Technical Reference Handbook

B
A
Creating Custom Fiber Types and Test Limits
A
C
D
B
C
ajt30f.eps
D
Figure 11-1. LIMIT TABLE EDITOR Screen
Creating Custom Test Limits
The fiber types tested by this limit. A custom limit can
include up to 5 fiber types. Three generic fiber types
are added by default to new custom limits.
To add an existing fiber type or create a new type,
A
press Add Fiber Type. To delete a fiber type, press
B
Remove Fiber Type.
C
The limit's name. Press
name.
Lists of OTDR and loss/length limits for each fiber type.
Exist is shown if a limit is present; a dash is shown if no
limit is present.
To see or edit a limit, highlight a cell under OTDR LIMIT
t
or LL LIMIT; then press
Space for test limits supported by future products.
11
Edit Name to change the
.
11-5