Calibration; If Something Seems Wrong; Options And Accessories - Fluke OF-500-01 OptiFiber Technical Reference Handbook

Calibration

The tester requires a traceable calibration once a year to
ensure that it meets or exceeds the published accuracy
specifications. Contact an authorized Fluke Networks
Service Center for information on getting your tester
calibrated.
To see when the tester last received a traceable calibration,
E
press Version Info from the HOME display.

If Something Seems Wrong

If something seems wrong with the tester, refer to
Table 12-1.
If the problem continues, refer to "Getting Help" below.
Tip: Online help is available for many error messages. Press
H
when an error message appears to see
information about the error.
If Table 12-1 does not help you solve a problem with the
tester, contact Fluke Networks for additional help. See
Chapter 1 for contact information. If possible, have the
tester's serial number, software and hardware versions, and
calibration date available. Press
HOME display to see this information.
E
Version Info from the
Maintenance and Specifications
If Something Seems Wrong
For warranty information, refer to the warranty at the
beginning of this manual. If the warranty has lapsed,
contact Fluke Networks for repair prices.

Options and Accessories

For the latest list of OptiFiber options and accessories and a
complete list of fiber test accessories visit the Fluke
Networks website at www.flukenetworks.com.
To order options and accessories contact an authorized
Fluke Networks distributor or contact Fluke Networks as
described in Chapter 1.
12
12-7