Fluke OF-500-01 OptiFiber Technical Reference Handbook page 118

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
A
The traces being compared. The reference trace is first
shown in gray behind the comparison trace.
B
The trace shown in black in the foreground. To switch the
positions of the traces, press
C
The wavelength and End setting for the foreground
trace.
To switch between wavelengths for either trace, press
F
; then select a wavelength for a trace.
D
Switches the foreground and background traces.
E
Displays the event table.
F
Moves the cursor to the next event on the trace. If you
K
use to move the cursor,
and moves the cursor to the previous event.
3-42
A
Next Trace.
C
changes to Previous Event
G
Sets and clears the measurement cursor. See "Using the
Measurement Cursor" on page 3-26.
H
Changes the softkey and arrow key functions. The
navigational cue above the softkey labels indicates the
arrow key functions:
KN
OPan, PCursor: Use
LM
trace. Use to move both traces up and down if
the vertical zoom is greater than 1:1.
KN
QZoom: Use and
vertically and horizontally.
KN
QMove Trace: Use
foreground trace vertically and horizontally.
C
Use Next Event/Previous Event to align the
foreground trace with events on the background trace.
to move the cursor on the
LM
to magnify both traces
LM
and to move the