Fluke OF-500-01 OptiFiber Technical Reference Handbook page 120

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
To use the real time trace, do the following:
1 Clean all fiber connectors.
2 Connect the launch fiber between the tester and the
fiber under test.
F
3 Press ; then select Real Time Trace.
To run the real time trace test by pressing
A
Change Test on the HOME screen to set the test
mode to Real Time Trace.
3-44
4 During the test, you may do the following:
To switch between Auto Length and Fixed Length,
press
To magnify the trace or use the measurement cursors,
press
zoom or set the cursors.
5 To save the results, press
T
, use
ID; then press
C
.
e
; then use the softkeys and arrow keys to
s
, select or create a fiber
s
again.